Language: EN | BM |
Cutting Plotter Mimaki CG-AR Series

Share:


Cutting Plotter Mimaki CG-AR Series



Features
- CG-AR Series come with 3 size.
- Capable to cut various type of materials & support full cut and folding lines.
- Able to cut long-length roll media and paper sheet by using sheet table (optional part).
- Cutting pressure up to 550g enables machine cut various materials such as PVC/Fluorescent/reflective/rubber (sheets).
- 3 types of cutting : Normal cutting, Full cutting, Half cutting.

- Over cutting and corner cutting prevents incomplete cutting.


- Support familiar software such as Microsoft Word/Excel/PowerPoint.



Specification
  CG-60AR CG-100AR CG-130AR
Acceptable sheet width 90 - 740 mm 90 - 1,250 mm 90 - 1,550 mm
(3.5 - 29.1'') (3.5 - 49.2'') (3.5 - 61.0'')
Effective cutting area *1 606 mm × 51 M (23.9'' x 167.3') 1,070 mm × 51 M (42.1'' x 167.3') 1,370 mm × 51 M (53.9'' x 167.3')
Maximum speed Cutting: 73 cm/s (28.7''/s), Moving at 45° direction: 103 cm/s (40.5''/s)
Adjustable speed range 1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9''/s (0.4''/s step adjustment)
10 - 73 cm/s (5 cm/s step adjustment): 4.0 - 28.7''/s (2.0''/s step adjustment)
Mechanical resolution X direction: 2.5 μm, Y direction: 5 μm
Command resolution 25 μm, 10μm(MGL-IIc) / 100 μm, 50 μm(MGL-Ic1)
Repeatability *2 ± 0.2 mm / 2 M
Effective Repeatability 586 mm × 2 M 1,050 mm × 2 M 1,350 mm × 2 M
Maximum pressure 550g
Range Cutter 10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
of down pressure Pen 10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 150g (10 g step)
  Creasing tool 10 - 20 g (2 g step), 20 - 100 g (5 g step), 100 - 550g (10g step)
Acceptable sheet *3*4 Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet and Cardboard (used in combination with an optional sheet table)
Acceptable tool *5 Eccentric cutter, Creasing tool, commercially available ball-point pen
Type of command MGL-IIc / MGL-Ic1
Interface USB, RS-232C, Ethernet
Receiver buffer size About 27 MB as standard (17 MB when sorting is effective)
Operational environment Temperature: 5 - 35 degC (41 - 95 degF),
Humidity: 35 - 75 % Rh (Non-condensing)
Power supply AC 100 V - 240 V 1A 50/60Hz
Power consumption 168W or less 228W or less
Dimensions(W×D×H) 1,010 × 355 × 355 mm 1,510 × 580 × 1,160 mm 1,810 × 580 × 1,160 mm
(39.8 × 14.0 × 14.0'') (59.4 × 22.8 × 45.7'') (71.3 × 22.8 × 45.7'')
1,010 × 580 × 1,160 mm *6    
(39.8 × 22.8 × 45.7'') *6    
Weight 17kg (37.5 lb) 35kg (77.2 lb) 43kg (94.8 lb)
27kg (59.5 lb) *6
Stand Options Standard equipment

Mimaki CG-AR series

Mimaki CG-AR Series Media set and Test cut


 Inquiry - Cutting Plotter Mimaki CG-AR Series

Fill out the form below and we'll be in touch soon.